User`s manual

4. BIOS SETUP

• Normal: Maximum number of cylinders, heads, and sectors supported are

1024, 16 and 63.

• Large: For drives that do not support LBA and have more than 1024 cylinders.

• LBA (Logical Block Addressing): During drive accesses, the IDE controller

Transforms the data address described by sector, head, and cylinder number

into a physical block address, significantly improving data transfer rates. For

drives with greater than 1024 cylinders.

4.3.4 Drive A/B type

Select the correct specifications for the diskette drive(s) installed in the computer.

None No diskette drive installed

360K, 5.25 in 5-1/4 inch PC-type standard drive; 360 kilobyte capacity

1.2M, 5.25 in 5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity

720K, 3.5 in 3-1/2 inch double-sided drive; 720 kilobyte capacity

1.44M, 3.5 in 3-1/2 inch double-sided drive; 1.44 megabyte capacity

2.88M, 3.5 in 3-1/2 inch double-sided drive; 2.88 megabyte capacity

4.3.5 Video

Select the type of primary video subsystem in your computer. The BIOS usually

detects the correct video type automatically. The BIOS supports a secondary video

subsystem, but you do not select it in Setup.

EGA/VGA

Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA,

SEGA, SVGA or PGA monitor adapters.

CGA 40 Color Graphics Adapter, power up in 40 column mode.

CGA 80 Color Graphics Adapter, power up in 80 column mode.

MONO Monochrome adapter includes high-resolution monochrome adapters.

4.3.6 Halt on

During the power-on self-test (POST), the computer stops if the BIOS detect a

hardware error. You can tell the BIOS to ignore certain errors during POST and

continue the boot-up process. These are the selections: