User`s manual

27
3. INSTALLATION
3.5.7 Connectors
SB-LINK Header
To support the legacy Sound Blaster compatible
Audio to the PCI bus.
WOL (Wake On LAN)
This header is used for remote wakeup of the
computer through a network. WOL requires a
PCI add-in network interface card (NIC) with
remote wakeup capabilities. The remote
wakeup header on the NIC must be connected
to the onboard Wake on LAN header. For Wake on LAN, the 5-V standby line for the
power supply must be capable of delivering 5V±5% at 720mA.
Modem Ring
This header is used for remote wakeup of the computer
through a modem. Modem Ring requires an add-in
modem card with remote wakeup capabilities. The
remote wakeup header on the add-in modem card must be connected to the onboard
Modem Ring header.
PCPCIGNTN
KEYDGND
DGND
PCPCIREQN
SERIRQ
+5VSB
MP_WAKEUP
GND
RI
GND
1 2SB-LINK
Header
WOL
(Wake On LAN)
Modem
Ring