User`s manual

3. INSTALLATION

Power Switch (J26, 2-pin)

This connector supports the ATX case-mounted

Power Switch, which in turn supports System

Suspend function. When the BIOS sets the

Power Button function to “Delay 4 sec.”, the

system can be set to the suspended mode once you push the power switch for no longer

then 4 seconds. If the power switch is pushed

down for over 4 seconds the system will be totally Power Off. When the BIOS setting

sets the Delay 4 second to “Instant-off”, then Power Switch function work as regular

power switch.

Power Switch J26

GROUND

PWRBIN