User`s manual

3. INSTALLATION

3.2 CPU (Central Processing Unit)

This motherboard provides a Single Edge Contact (SEC) slot and a Bridges on the

board for the Pentium II processor packaged in a SEC cartridge. This cartridge includes

the processor core, second-level cache, thermal plate and black cover. When mounted

in Slot 1, the processor is secured by a retention mechanism attached to the

motherboard.

Also this motherboard can be upgraded with Pentium II processors that run at higher

speeds. When upgrading the processor, use the BIOS configuration mode to change the

processor speed.

3.2.1 Install CPU

Please follow the below steps to install your CPU, and configure the speed in according

to Processor Jumper Setting List.

First please ensure the following parts you received with this motherboard. One

Pentium II URM (Universal Retention Mechanism) and four Lock Pins. Usually, the

URM was set on motherboard already.

Universal Retention Mechanism

Four Lock Pins