User`s manual

43
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of your
drive must match with the drive table. The hard disk will not work properly if you enter improper
information for this category. If your hard disk drive type is not matched or listed, you can use Manual to
define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter the
information directly from the keyboard. This information should be provided in the documentation from
your hard disk vendor or the system manufacturer.
Access Mode The settings are Auto, CHS, Large, and LBA.
Cylinder Number of cylinders
Head Number of heads
Precomp Write precomp
Landing Zone Landing zone
Sector Number of sectors
• Video
Select the type of primary video subsystem in your computer. The BIOS usually detects the correct video
type automatically. The BIOS supports a secondary video subsystem, but you do not select it in Setup.
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SEGA, SVGA or
PGA monitor adapters.
CGA 40 Color Graphics Adapter, power up in 40 column mode
CGA 80 Color Graphics Adapter, power up in 80 column mode
MONO Monochrome adapter, includes high resolution monochrome adapters
• Halt On
During the power-on self-test (POST), the computer stops if the BIOS detects a hardware error. You can
tell the BIOS to ignore certain errors during POST and continue the boot-up process.
All Errors If the BIOS detects any error, POST stops and prompts you to continue or enter
BIOS setup.
No Errors POST does not stop for any errors.
All, But Keyboard POST stops for all errors except keyboard errors.