User`s manual

32
area of system memory usually discusses their memory requirements. The settings are:
Enabled and Disabled.
System BIOS Cacheable
Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting
in better system performance. However, if any program writes to this memory area, a
system error may result. The settings are: Enabled and Disabled.
Video RAM Cacheable
Select Enabled allows caching of the video BIOS, resulting in better system performance.
However, if any program writes to this memory area, a system error may result. The
settings are: Enabled and Disabled.
VGA Share Memory Size
In this item you can assign video memories size share from the system memories,
available options are 16, 32, 64.
Select Display Device
Allow you to select type of display CRT, LCD, DVI, TV.
TV_Type
Allow you to select TV standard NTSC, PAL…
TV_Connector
Allow you to select type of TV connector SVideo, RGB, CVBS, SDTV…
TV_Layout
Allow you to select type of display Component, RGB, SVideo...
Panel Type
Allow you to select different type of LCD panel resolution 640x480, 800x600,
1024x768...
DRAM Clock
When “By SPD” has been select, BIOS will read SDRAM module SPD information pre-
define by memory module manufacture or select a 133MHz memory clock.
DRAM Timing
When “By SPD” has been select, BIOS will read SDRAM module SPD information pre-
define by memory module manufacture.
SDRAM CAS Latency
When synchronous DRAM is installed, the number of clock cycles of CAS latency
depends on the DRAM timing. The settings are: 2T and 2.5T.
Note: Change these settings only if you are familiar with the chipset.
SDRAM RAS# to CAS# Delay