User`s manual

User’s Manual

2.2.1.3 IDE Channel 0/1/2/3/4/5 Master / Slave / SATA1 / SATA2

z IDE HDD Auto-Detection

[Press Enter]

to select this

option for automatic device detection.

z IDE Device Setup

[Auto]: Automatically detects IDE devices during POST

[None]: Select this when no IDE device is used. The system will skip the auto-detection

setup to make system start up faster.

[Manual]: User can manually input the correct settings.

9 Access Mode: The options are CHS/LBA/Large/Auto

9 Capacity: Capacity of currently installed hard disk

9 Cylinder: Number of cylinders

9 Head: Number of heads

9 Precomp: Write precomp

9 Landing Zone: Landing zone

9 Sector: Number of sectors

2.2.1.4 Halt On

Set the system to halt on errors according to the system functions specified in each option.

Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But Diskette] [All, But

Disk/Key]

2.2.1.5 Memory

This category displays base memory, extended memory, and total memory detected during

POST (Power On Self Test).