User`s manual

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save

energy saving while operating in a manner consistent with your own style of computer use.

Power Management Setup

Item Help

ACPI Function [Enable]

Power Management Option [User Define]

HDD Power Down [Disabled]

Suspend Mode [Disabled]

Video Off Option [Suspend=> Off]

Video Off Method [V/H SYNC+ Blank]

MODEM Use IRQ [3]

Soft-off by PWR-BTTN [Instant-off]

AC Loss Auto Restart [Auto]

► IRQ/ Event Activity Detect [Press Enter]

Menu Level >

↑↓→←

Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

ACPI Function

This item allows you to Enabled/Disabled the Advanced Configuration and Power Management (ACPI).

Available settings are Enabled and Disabled.

Power Management Option

The available selection for the Power Management is User’s Define, Minimum Saving and Maximum

Saving.

HDD Power Down

This item allow you to select to power down HDD when system enter power saving mode.

Available settings are Enabled and Disabled.

Video Off Option

This determines the manner in which the monitor is blanked. The choices are Yes → Video will off, and

No→ Video always On.

Video Off Method

This determines the manner in which the monitor is blanked.

DPMS

(default) Initial display power management signaling.

Blank Screen

This option only writes blanks to the video buffer.

V/H SYNC+Blank This selection will cause the system to turn off the vertical and horizontal

synchronization ports and write blanks to the video buffer.