User`s manual

Onboard Serial Port 2

This item allows you to select the serial port 2 I/O/ IRQ to be used.

Onboard Parallel Port

There is a built-in parallel port on the on-board Super I/O chipset that Provides Standard, ECP, and EPP

features. It has the following option:

Disabled

(3BCH/IRQ7)/

Line Printer port 0

(278H/IRQ5)/

Line Printer port 2

(378H/IRQ7)

Line Printer port 1

Parallel Port Mode

SPP : Standard Parallel Port

EPP : Enhanced Parallel Port

ECP : Extended Capability Port

SPP/EPP/ECP/ECP+EPP

To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To operate the

onboard parallel port in the EPP modes simultaneously, choose “EPP.” By choosing “ECP”, the

onboard parallel port will operate in ECP mode only. Choosing “ECP+EPP” will allow the onboard

parallel port to support both the ECP and EPP modes simultaneously. The ECP mode has to use the

DMA channel, so choose the onboard parallel port with the ECP feature. After selecting it, the

following message will appear: “ECP Mode Use DMA” at this time, the user can choose between DMA

channels 3 to 1. The onboard parallel port is EPP Spec. compliant, so after the user chooses the

onboard parallel port with the EPP function, the following message will be displayed on the screen:

“EPP Mode Select.” At this time either EPP 1.7 spec. or EPP 1.9 spec. can be chosen.

Parallel Port Mode

This item allows you to select the parallel port mode to be used.

Available select are SPP, EPP and ECP.

Onboard Fast IR

This item allows you to Enabled or Disabled the onboard IRDA function.

Available option: Enable and Disabled.