User`s manual

37
3-7 Integrated Peripherals
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
Item Help
► VIA OnChip IDE Device [Press Enter]
► VIA OnChip PCI Device [Press Enter]
► Super IO Device [Press Enter]
Init Display First [PCI Slot]
V-Link Data 2X Support [Disabled]
Onboard Serial Port 3 [3E8]
Serial Port 3 Use IRQ [IRQ5]
Onboard Serial Port 4 [2E8]
Serial Port 4 Use IRQ [10]
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
VIA OnChip IDE Device
Please refer to section 3-7-1
VIA OnChip PCI Device
Please refer to section 3-7-2
Super IO Device
Please refer to section 3-7-3
Init Display First
This item allows you to decide to activate whether PCI Slot or AGP VGA first. The settings are:
PCI Slot, AGP Slot.
V-Link Data 2X Support
This item allows you to enabled 2x data transfer between Northbridge to Southbridge V-Link bus.
Onboard Serial Port 3 /4
This item allows you to select serial port I/O address.
Serial Port 3/ 4 use IRQ
This item allows you to select serial port IRQ.