User`s manual

FAN Speed Headers

CPU FAN

(5) IDE Activity LED: IDE LED (CN1 1-3

This connector connects to the hard disk activity indicator light on the case.

(6) Reset switch lead: RESET (CN1 5-7)

This 2-pin connector connects to the case-mounted reset switch for rebooting your computer

without having to turn off your power switch. This is a preferred method of rebooting in

order to prolong the lift of the system’s power supply. See the figure below.

(7) Power LED (CN1 2-4)

The Power LED is light on while the system power is on. Connect the Power LED from the

system case to this pin.

(8) Power switch: PWR BTN (CN1 6-8)

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the

system.

System Front Panel Connector

HDLED

RESET

VCC5

GND

VCC5

PWR LED

PWRBT

PWRBTN

GND

HDDLED

RSTSW

Reserve

GND

CN1

Pin 1

(9) FAN Speed Headers (3-pin): CPUFAN (CN6)

These connectors support cooling fans, depending on the fan manufacturer, the wire and

plug may be different. The red wire should be positive, while the black should be ground.