User`s manual

IX945GSE2 User’s Manual
40
y POWER ON Function
y KB Power ON Password
The system will ask for a password, after entering the correct password the keyboard
can then be used.
y Hot Key Power ON
Awaken the system by pressing the hot key button. The choices are “Ctrl-F1”, “Ctrl-F2”,
“Ctrl-F3” to “Ctrl-F12”.
y Onboard Serial Port 1 & 2
The settings are “Disabled”,“3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2E8/IRQ3”, and
“Auto” for the on-board serial connector.
y PWRON After PWR-Fail
This item allows you to select if you want to power on the system after power failure.
The choice: Off, On, Former-Sts.
y Serial Port IRQ Sharing
The choices: “PCI mode” , “ISA mode”
y Watch Dog Timer Select
This option will determine watch dog timer. The choices: Disabled, 10, 20, 30, 40 Sec. 1, 2,
4 Min.
y Onboard Serial Port 3 , 4 , 5 , 6 , 7 , 8
Port 3 & 4 , the settings are “Disable”, “280”, “288”, for the on-board serial connector.
Port 5 & 6 , the settings are “Disable”, “2C0”, “2C8”
Port 7 & 8 , the settings are “Disable”, “2B0”, “2B8”
y Serial Port 3 , 4 , 5 , 6 , 7 , 8
The settings are “IRQ5”, “IRQ7”, “IRQ10”, “IRQ11”for IRQ address selection
2.3.4.4 USB Device Setting