User`s manual

12
2-4 Install Memory
The IN915GVE support Dual Channel Technology, operating with Dual Channel
Technology, the bandwidth of Memory Bus will double up to 6.4GB/s.
IN915GVE includes 2x DDR2 DIMM (
D
ouble
D
ata
R
ate) memory socket allow up to a
maximum memory size of 2.0GB.
Support 256Mb, 512Mb and 1Gb technologies implemented as x8, x16 devices.
• Non-ECC un-buffered only.
Use of two DDR2 memory modules in to same color DIMMs slots is strongly
recommended, for optimal performance for Dual Channel Technology to work. Always
install DIMMs with same CAS latency to avoid memory timing compatibility problem. It
is also recommended to use memory modules from the same vendor.
Valid Memory Configurations
Bank DDR2 Single Channel Dual Channel Total Memory
DDRII A1 DS/SS DDRII X X X X
256MB
∼
1.0GB
DDRII B1 DS/SS DDRII X X X X X
256MB
∼
1.0GB
Total System Memory(Max. 4.0GB)
256MB
∼
2.0GB
* DS Double Side, SS Single Side
Generally, installing DDRII SDRAM modules to your motherboard is very easy, refer to
figure 2-4 to see what a 240-Pin DDRII 533/DDRII 400 SDRAM module looks like.
DDRII B1 DDRII A1
NOTE!
When you install DIMM module fully into the DIMM socket the eject tab
should be locked into the DIMM module very firmly and fit into its indention
on both sides.