User`s manual

BIOS SETUP

completes its cycle. Next time when booting the system, a password prompt will

appear if the password function is enabled.

4.13 Set User Password

When you select this function, a message appears at the center of the screen

“ENTER PASSWORD”.

Type the password, up to eight characters, and press

<ENTER> key. Typing a password clears any previously entered password from

CMOS memory. Now the message changes to “CONFIRM PASSWORD”. Again,

type the password and press <ENTER> key. To abort the process at any time,

press <ESC> key.

In the Security Option item in the BIOS Features Setup screen select System or

Setup:

System: Enter a password each time the system boots and whenever you

enter Setup.

Setup: Enter a password whenever you enter Setup.

NOTE

: To clear the password, simply press Enter when asked to enter a password.

Then the password function is disabled.

4.14 Save & Exit Setup

This feature allows the changes to be made to the CMOS setup to be saved. The

system will resume booting after a successful save.

4.15 Exit Without Saving

Abandon all CMOS value change without saving.