User`s manual

BIOS SETUP

4.7.3 Video Off Method

Determines the manner in which the monitor is blanked.

V/H

SYNC+Blank

System turns off vertical and horizontal synchronization ports

and writes blanks to the video buffer.

DPMS

Select this option if your monitor supports the Display Power

Management Sign

aling (DPMS) standard of the Video

Electronics Standards Association (VESA). Use the software

supplied for your video subsystem to select video power

management values.

Blank Screen System only writes blanks to the video buffer.

4.7.4 MODEM Use IRQ

Determines which IRQ the MODEM can use. The choices are: 3, 4, 5, 7, 9, 10, 11

and N/A.

4.7.5 Power Button Function

Pressing the power button for more than 4 seconds forces the system to enter the

Soft-Off state. The settings are: Delay 4 Sec, Instant-Off.

4.7.6 PM Wake Up Events

Ring Power Up Control

During Disabled, the system will ignore any incoming call from the modem.

During Enables, the system will boot up if there’s an incoming call from the modem.

PCIPME Power Up Control

This will enable the system to wake up by PCI device Power Management function.

The settings are: Enables or disables.

KB Power On Password

This Item can setting Power On Password, if you Enabled keyboard Power On function then

you can power On system by key-in the password which you have set.

Power Up by Alarm

This function is for setting Date and time for your computer to boot up. During

Disabled, you cannot use this function. During Enable, Choose the Date and Time

Alarm.