User`s manual

23
Installation
3.6.5 Front Panel connectors (203.6.5 Front Panel connectors (20--pin)pin)
Power Switch, Power LED, Reset, Sleep and HDD LED.
KeyLock
RESET
PWR LED
PWR
BTN
SPEAKER
Turbo
LED
Turbo
SW
HDD LED
Reset Switch Connector (2-pin)
This connector supports the front panel case-mounted reset button. It is advised
that the reset switch be used for rebooting the system in order to extend the life of
the system’s power supply.
HDD (IDE) LED Connector (2-pin)
The motherboard supports two straight 2-pin headers set for connecting to front
Panel Hard Disk activity LED indicator.
LAN LED (2-pin)
The motherboard supports two straight 2-pin headers set for connecting to front
Panel Hard LAN activity LED indicator.
Power/Sleep Switch (2-pin)
This connector supports the ATX case-mounted Power Switch, which in turn
supports System Suspend function. When the BIOS sets the Power Button function
to “Suspend”, the system can be set to the suspended mode once you push the
power switch for no longer then 4 seconds. If the power switch is pushed down for
over 4 seconds the system will be totally Power Off. When this BIOS setting sets to