User`s manual

Installation

3.4.2 Installation Procedure

Step1: Make sure Pin 1 of the DIMM match with pin 1 of the DIMM socket.

Step2:

Insert the DIMM module into the DIMM socket vertically. After inserting the

DIMM module completely into the socket, push up on the socket latches

securing the DIMM into place.

If the pin 1 of the DIMM module does not line up with pin 1 of the socket, the DIMM

module will not be inserted correctly into the socket.

Be careful not to misfit the DIMM Module into DIMM sockets in wrong direction. This

module can be inserted into the socket only one way. To release the memory

module, push both latches down and carefully rock the module forward and

backward while slowly lifting it upward.

3.4.3 DIMM Module Combinations

Each DIMM socket can be inserted with 8MB, 16MB, 32MB, 64MB, 128MB and

256MB DIMM. For example, the following figure shows you one way to insert your

DIMM.

Select DIMM 1:128MB

DIMM 2:128MB

Total

128+128=256

Select 1 out of 7 Choices (empty, 8MB, 16MB, 32MB, 64MB, 128MB, 256MB) in

DIMM1.

Then, repeat again in DIMM2 for 7 choices (Empty, 8 MB, 16 MB, 32 MB, 64 MB,

128MB, 256MB) to go through your own path.