User`s manual

3.INSTALLATION

Front USB Header (J14, 10-pin)

You can use either this Front USB or Back Panel USB by setting the USB Select

jumper. Following table shows the jumper settings.

USB Select Jumper

USB Select Front USB Back USB

JP4

JP5

WOL (Wake On LAN ) (J16, 3-pin)

This header is used for remote wakeup of the computer through a network. WOL

requires a PCI add-in network interface card (NIC) with remote wakeup

capabilities. The remote wakeup header on the NIC must be connected to the

onboard Wake on LAN header. For Wake on LAN, the 5-V standby line for the

power supply must be capable of delivering 5V±5% at 720mA.

CPU Fan (J17, 3-pin)

Your Pentium Cartridge may have an attached heatsink and Fan; this connector is

for the CPU Fan.

CD-IN

CPU FAN

MODEM-IN

WOL

S/PDIF

AUX-IN