User`s manual

24
3.INSTALLATION
3.5.3 Floppy Drive Connector (J23, 33-pin block)
The FDC sub-system can control
three types of floppy drives (1.2,
1.44 and 2.88MB) or compatible
tape drives. The connection to the
floppy drive is via a header (J19).
The floppy disk interface includes
48mA drivers and inputs on the
drive interface.
3.5.4 Power Input Connector (J20, 20-pin block)
This connector supports a Micro
ATX power supply. When
connecting, make sure the lock key
matches the hook attached on a
power supply cable. The power
cord should be unplugged when
you connect it.
1 2
3433
1 2
3433