User`s manual

3.INSTALLATION

Step 1: Place the Universal Retention Mechanisms over the CPU slot (SEC slot) on

motherboard.

Step2: Fix the Retention Mechanism to the motherboard with four Lock Pins. To

insert the Lock Pins into holes to lock them tight and firmly. And then unfold

the URM.

Step 3: Push the SEC Cartridge’s two locks inward and insert the CPU into

Retention Mechanism. Press the top of CPU gently but firmly until it is fully

inserted.

Warning : It is strongly recommended that a heatsink and CPU cooling fan be used to

prevent the CPU from overheating. Applying a thermal of jelly between the

1. Unfold the Retention

Mechanism.

2. Place the Retention

Mechanism over CPU Slot.

3. Push 4 lock pins into holes to

fix Retention Mechanism on

motherboard.

4. Insert CPU. Push the two lock

pins inward and press CPU

down gently.