User`s manual

- 41 -
4. BIOS Setup
4.8 PnP/PCI Configurations Menu
Menu Item Setting Descriptions
No Chooses No if you need the BIOS to
configure non-boot devices.
PNP OS
Installed
Yes Chooses Yes if you are using a Plug and Play
capable operating system.
Disabled Closes this function. This is the default
setting.
Reset
Configuration
Data
Enabled Normally, this field is set to
Disabled
.
However, if you have installed a new add-on
and the system reconfiguration results in a
conflict so serious that the system can not
boot, changing the setting to
Enabled
will
allow you to reset the ESCD (Extended
System Configuration Data) when exiting
Setup.
Manual Chooses specific resources by going into
each of the sub menus in the field.
Resources
Controlled By
Auto (ESCD) Automatically choose resources for system.
IRQ Resources Press Enter When resources are controlled manually,
assign each system interrupt a type,
depending on the type of device using the
interrupt. Press enter to invoke the function.