User`s manual

- 39 -
4. BIOS Setup
Menu Item Setting Descriptions
Enabled Enables the ACPI function. ACPI Function
Disabled Closes this function.
User Defined Allows you to set each mode individually.
When not disabled, each of the ranges are
from 1 min. to 1 hr. except for HDD Power
Down which ranges from 1 min. to 15 min.
and disable.
Min Saving Minimum power management. Doze Mode =
1 hr. Standby Mode = 1 hr., Suspend Mode =
1 hr., and HDD Power Down = 15 min.
Power
Management
Max Saving
Maximum power management --
ONLY
AVAILABLE FOR SL CPU’s
. Doze Mode
= 1 min., Standby Mode = 1 min., Suspend
Mode = 1 min., and HDD Power Down = 1
min.
S1(POS) Set ACPI Suspend type to S1. ACPI Suspend
Type
S3(STR) Set ACPI Suspend type to S3.
Yes An advanced power management device will
be activated to enhance the Max. Power
Saving mode and stop the CPU internal clock.
If Advance Power Management(APM) is
installed on your system, selecting Yes gives
better power savings.
PM Control by
APM
No Chooses this option while the Max. Power
Saving is not enabled.
Suspend -> Off Monitor blanked when the system enters the
Suspend mode.
All Modes-> Off Monitor blanked when the system enters either
Suspend or Standby modes.
Video Off Option
Always On Monitor will remain on during power saving
power.
DPMS Initial displays power management signaling.
Blank Screen, This option only writes blanks to the video
buffer.
Video Off
Method
V/H
SYNC+Blank
This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.