User`s manual

FR550
3-7
Total Memory (Slot 1-4) Bank A (Slot 1 & 2) Bank B (Slot 3 & 4)
16MB None 8MBx2
32MB None 16MBx2
64MB None 32MBx2
16MB 4MBx2 4MBx2
24MB 4MBx2 8MBx2
40MB 4MBx2 16MBx2
72MB 4MBx2 32MBx2
24MB 8MBx2 4MBx2
32MB 8MBx2 8MBx2
48MB 8MBx2 16MBx2
80Mb 8MBx2 32MBx2
40MB 16MBx2 4MBx2
48MB 16MBx2 8MBx2
64MB 16MBx2 16MBx2
96MB 16MBx2 32MBx2
72MB 32MBx2 4MBx2
80MB 32MBx2 8MBx2
96MB 32MBx2 16MBx2
128MB 32MBx2 32MBx2
128MB 64MBx2 None
128MB None 64MBx2
256MB 64MBx2 64MBx2
3.2.3 Installation Procedure for SIMM
Insert SIMM into the
SIMM sockets at a 45
degree angle.
1) PIN1 of the SIMM must match with the PIN1 of the SIMM socket.
2) The module will only insert into the socket one way. An orientation cut-out will prevent
you from inserting it the wrong way.
3) Insert the SIMM into the SIMM socket at a 45 degree angle. If pin 1 of the SIMM does
not line up with pin 1 of the socket, the SIMM will not insert into the socket. After
inserting the SIMM module completely into the socket, push the SIMM module into a
vertical position.