User`s manual

FR550
3-2
3.1.2 Setting 3-pin jumpers
Jumper Pins 1 & 2 are closed with a jumper cap
Jumper Pins 2 & 3 are closed with a jumper cap
3.1.3 Setting 2-pin jumpers
This jumper is closed with the jumper cap placed over 2 pins
This jumper is open with the jumper cap removed from the 2 pins
WARNING: Some pins are used for connectors or power sources. These are clearly marked
separately from the jumpers listed in “Mainboard Layout”. Any improper placing of jumper
caps over these connectors will result in damage to your mainboard
3.1.4 Configuration Jumpers
Jumpers
1) JP4, JP5 Processor voltage selection
2) JP2, JP3, & JP6 Processor/System speed setting
3) JP8 CMOS Clear
4) JP1, JP7 Reserved
The Jumper located As below:
JP6
JP5
JP4
JP3
JP2
JP8