User`s manual

4
1-2 Specification
Spec Description
Design
ATX form factor 4 layers PCB size: 11.6”(W) x 9.6”(D) (295 x 244
mm)
Chipset
Intel
®
945G Graphics Memory Controller Hub (GMCH) Chipset
34mm x 34mm, 1202 balls.
Intel
®
82801GR I/O Controller Hub (ICH7R) Chipset 3mm x31mm,
652 balls.
CPU Socket
(PLGA 775 Socket)
Support Intel Core™ 2 Duo, Pentium
®
D, Pentium
®
4, Pentium
®
Dual-Core, Celeron™ D LGA775 processor
Support CPU Frequency 533/800/1066 MT/s FSB
Video Display
Integrated Intel High Performance Graphics Media Accelerator 950
2D/3D, Graphics Core at 400MHz.
Support VGA output up to 2048x1536 @ 75 Hz
Support ADD2/ADD2+ card uses PCI Express graphics x16 slots
Memory Socket
240-pin DDR2 SDRAM module socket x4
Support Memory Type 256Mbit, 512Mbit and 1Gbit Technology
Support Only 8x and 16x SDRAM device with 4 banks and also
supports 8 bank, 1-Gbit DDR2 Devices.
Support 1.8V DDR2 400 / DDR2 533 / DDR2 667
Expandable up to 4GB
Expansion Slot
1x PCI Express x16 slot (for PCI Express Graphics Card or ADD2 )
5x 32-bit PCI slots
1x PCI Express x4 slot
Integrate IDE
One PCI IDE controllers support PCI Bus Mastering, ATA
PIO/DMA and the ULTRA DMA 33/66/100 functions that deliver the
data transfer rate up to 100 MB/s
Four Serial ATA II host controller
Data transfer up to 3.0Gb/s
Raid Level 0, 1 , 5, 10 support (with ICH7R)
LAN On Board
Intel
®
82541 PI 10/100/1000 PCI Gbe LAN
Intel
®
82573E PCI Express Gbe LAN
Audio
AC’97 Digital Audio controller integrated
AC’97 7.1 Audio CODEC on board
Sound Blaster Pro compliant
Audio driver and utility included
BIOS
Award
®
4MB Flash ROM
Multi I/O
PS/2 keyboard and PS/2 mouse connectors
Floppy disk drive connector x1
Parallel port x1, Serial port x2 on header
USB 2.0 connector x8, (4 on header)
Audio connector: Line-in, Line-out, MIC, S/PDIF-IN, S/PDIF-OUT