User`s manual

Step3. “Create Volume Menu” will be prompted.

Step4. Setup the name for RAID.

Step5. Set RAID Level to “RAID 0 (Stripe).

Step6. Set Strip size as 128KB (Default).

Step7. The Capacity option will identify the built RAID-0 drive size.

Step8. Pick the option of “Create Volume”.

Step9. The system will prompt with the message “Are you sure you want to

create this volume (Y/N):”

Step10. Press “Y” to confirm the volume creation process.

Step11. Back to main menu, pick the last option to exit the utility.

RAID 1, 1+0, and 5 can be installed in the same way by selecting a different

option for Step5.