User`s manual

42
3-9 PnP/PCI Configuration
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configuration
Item Help
► PCI Express Configuration [Press Enter]
► PCI Add-on ROM Control [Press Enter]
Primary Video Device [PCI GFX]
Resources Controlled By [Auto]
x IRQ Resources Press Enter
PCI/VGA Palette Snoop [Disabled]
INT Pin 1 Assignment [Auto]
INT Pin 2 Assignment [Auto]
INT Pin 3 Assignment [Auto]
INT Pin 4 Assignment [Auto]
INT Pin 5 Assignment [Auto]
INT Pin 6 Assignment [Auto]
INT Pin 7 Assignment [Auto]
INT Pin 8 Assignment [Auto]
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fai-Safe Defaults F7:Optimized Defaults
PCI Express Configuration
See Section 3-9-1.
Primary Video Device
This item allows you to select which display will have priority. To use a PCI
video card as the primary display, select “PCI GFX”. Available choice: PCI GFX,
i945G or PCIe GFX.
Resource Controlled By:
The Award Plug and Play BIOS has the capacity to automatically configure all of
the boot and Plug and Play compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system such as
Windows
®
95/98. If you set this field to “manual” choose specific resources by
going into each of the sub menu that follows this field (a sub menu is preceded by
a “>”).
The settings are: Auto(ESCD), Manual.
IRQ Resources:
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
Please refer to section 3-9-2