User`s manual

39
3-8 Power Management Setup
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
Power Management Setup
Item Help
► PCI Express PM Function [Press Enter]
ACPI Function [Enabled]
ACPI Suspend Type [S2(STR)]
Run VGABIOS if S3 Resume Auto
Power Management [User Define]
Video Off Method [DPMS]
Video Off In Suspend [Yes]
Suspend Type [Stop Grant]
Modem Use IRQ [3]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Soft-Off by PWR-BTTN [Instant-Off]
Wake-Up by PCI card [Enabled]
Power On by Ring [Enabled]
Resume by Alarm [Disabled]
x
Date(of Month) Alarm 0
x
Time(hh:mm:ss) Alarm 0:0:0
** Reload Global Timer Events **
Primary IDE 0 [Disabled]
Primary IDE 1 [Disabled]
Secondary IDE 0 [Disabled]
Secondary IDE 1 [Disabled]
FDD,COM,LPT Port [Disabled]
PCI PIRQ[A-D]# [Disabled]
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
PCI Express PM Function
See Section 3-8-1
ACPI Function
Enables or disables the Advanced Configuration and Power Interface (ACPI).
ACPI Suspend Type
This option allows you to select ACPI suspend mode. Available choice: S1, S3 or S1 &
S3.
Power Management
This option allows you to select the type (or degree) of power saving for the Suspend
mode.