User`s manual

36
Combined Mode: PATA and SATA are combined. Max of 2 IDE drives in each
channel.
Enhanced Mode: Enable both SATA and PATA. Max of 6 IDE drives are
supported.
SATA Only: SATA is operating in legacy mode.
SATA PORT Speed Settings
This item allows you to select the speed of SATA ports.
[Disabled] Disable this function.
[Force GEN I] Force the data transfer rates to 1.5Gb/s(150 MB/s)
[Force GEN II] Force the data transfer rates to 3.0Gb/s(300 MB/s)
PATA IDE Mode
Changes mode for SATA Port.
Primary: P1, P3 is Secondary
Secondary: P0, P2 is Primary
3-7-2 Onboard Device
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device
Item Help
USB Controller [Enable]
USB 2.0 Controller [Enable]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Azalia/AC97 Audio Select [Auto]
Onboard Lan2 Controller [Enabled]
Onboard Lan2 BootRom [Disabled]
Menu Level >>
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
USB Controller
This option allows you to Enabled or Disabled the onboard USB controller.
Available choices: Enabled or Disabled.