User`s manual

26
hard disk drive type is not matched or listed, you can use Manual to define your
own drive type manually.
If you select Manual, related information is asked to be entered to the following
items. Enter the information directly from the keyboard. This information should
be provided in the documentation from your hard disk vendor or the system
manufacturer.
Access Mode
The settings are Auto, CHS, Large, and LBA.
Cylinder
number of cylinders
Head
number of heads
Precomp
write precomp
Landing Zone
landing zone
Sector
number of sectors
Video
Select the type of primary video subsystem in your computer. The BIOS usually
detects the correct video type automatically. The BIOS supports a secondary
video subsystem, but you do not select it in Setup.
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For EGA,
VGA, SEGA, SVGA or PGA monitor adapters.
CGA 40 Color Graphics Adapter, power up in 40 column mode
CGA 80 Color Graphics Adapter, power up in 80 column mode
MONO Monochrome adapter, includes high resolution monochrome
adapters
Halt On
During the power-on self-test (POST), the computer stops if the BIOS detects a
hardware error. You can tell the BIOS to ignore certain errors during POST and
continue the boot-up process.
All Errors If the BIOS detects any error, POST stops and prompts you
to continue or enter BIOS setup.
No Errors POST does not stop for any errors.
All, But Keyboard POST stops for all errors except keyboard errors.
All, But Diskette POST stops for all errors except diskette drive errors.
All, But Disk/Key POST stops for all errors except keyboard or disk errors.