User`s manual

This 2-pin connector connects to the case-mounted reset switch for

rebooting your computer without having to turn off your power switch.

This is a preferred method of rebooting in order to prolong the life of the

system’s power supply. See the figure below.

(6) Power LED (J34)

The Power LED is light on while the system power is on. Connect the

Power LED from the system case to this pin.

(8) Power switch: PWR BTN (J34)

This 2-pin connector connects to the case-mounted power switch to power

ON/OFF the system.

(9) FAN Speed Headers (3-pin) : Chassis FAN, SYSFAN, CPUFAN

These connectors support cooling fans, depending on the fan manufacturer,

the wire and plug may be different. The red wire should be positive, while

the black should be ground. Connect the fan’s plug to the board taking into

consideration the polarity of the connector.

System Front Panel J34

Pin 1

HDLED

RESET

PWR LED

PWRBT

IRDA

SMB Clk

SMB Dat

KEY

YEL

PWRBTN

GRN

PSW+

IRRX

RSTSW

VCC

GND

HDDLED

VCC

IRTX

GND

SMBUS

CPU FAN HEADER

CPU

FAN

SYSTEM FAN2 HEADER

SFAN

1 4

SFAN

1 4