User`s manual

This processor is intended to be professionally installed. Before installing the

processor, please review the additional notes available at

http://www.intel.com/go/integration. Take proper electrostatics discharge (ESD)

precautions such as using appropriate ground strips, gloves, and ESD mats.

1) Open socket lever by pushing lever down

and away from socket (A). Lift lever (B).

3) Remove protective cover (E) from load

plate. Do not discard the protective cover.

Always replace the socket cover if the

processor is removed from the socket.

5) Hold processor with thumb and index

fingers oriented as shown. {Ensure fingers

align to socket cutouts (F)}. Align notches

(G) with socket (H). Lower the processor

straight down without tilting or sliding the

processor in the socket.

2) Open load plate (C). DO NOT TOUCH SOCKET

CONTACTS (D)

4) Remove processor from protective cover. (HOLD

PROCESSOR ONLY AT EDGES, BEING CAREFUL

NOT TO TOUCH BOTTOM OF PROCESSOR) Do

not discard the protective cover. Always replace the

socket cover if the processor is removed from the

socket.

6) Close load plate. Pressing down on load plate (I)

close and engage socket lever (J).