User`s manual

BIOS Setup

4.7 Secondary IDE Drives

4.7.1 Secondary Master

Select Auto BIOS will detects if a drive is installed and its CHS parameters. If Manual is

select, CHS parameters needs to be manually insert. Select None for no IDE drive installed

Drive Type:

None No IDE drive is installed

Manual Enter drive CHS parameters

Auto BIOS detects if a drive is installed and its CHS parameters

Mode:

Auto BIOS check if the drive supports LBA mode, if so LBA mode is

enable and used, otherwise CHS mode is use

CHS Enter drive Cylinder, Head, Sector manually.

UDMA:

Configure PIO or UDMA modes of the IDE device.

4.7.2 Secondary Slave

Select Auto BIOS will detects if a drive is installed and its CHS parameters. If Manual is

select, CHS parameters needs to be manually insert. Select None for no IDE drive installed.

See description above for available options.