User`s manual

11
Installation
3.2 Connectors and Jumpers
This motherboard requires jumper setting for some features. The following graphic shows you how to set a proper
jumper setting.
PIN 1
PIN 1
Note: In the following pages, the triangle
▲
mark stands for pin 1 of the connector or header.
Connectors/Jumpers List
J1: Keyboard, and Mouse Ports J2: NC
J3: COM2 J4: COM1
J5: USB 1, USB2, and LAN Ports J6: Telephony (Green)
J7: Smart Card J8: Line-out, Line-in, Mic-in
J9: Game/MIDI Port J10: Parallel Port
J11: CD-In (Black) J12: ISA Slot2
J13: ISA Slot1 J14: LAN Active LED
J15: System Fan J16: PCI Slot5
J17: PCI Slot4 J18: PCI Slot3
J19: PCI Slot2 J20: PCI Slot1
J21: ATX 12V Connector J22: AGP Slot
J23: USB1 J24 CPU FAN
J25: USB2 J26: Brightness Adjust (W/ SMI722 Only)
J27: DDR DIMM1 J28: DDR DIMM2
J29: LCD P2 (W/ SMI722 Only) J30: Secondary IDE
J31: LCD P1 (W/ SMI722 Only) J32: Primary IDE
J33: Wake On LAN J34: ATX Power
J35: Chassis Intrusion J36: NI
J37: Ring In J38: SCSI LED
J39: Chassis Fan J40: Floppy
J41: VGA Header (W/ SMI722 Only) J42: TV-Out
J43: Front Panel
JP1: BIOS Write Protect JP2: Clear CMOS
JP3: Operation Mode Select JP4: Watch Dog Reset
JP5: Auto On
VR1 Contrast Adjust (W/ SMI722 Only) VR2 Brightness Adjust (W/ SMI722 Only)