User`s manual

- -
25
BIOS Setup
4.2 Main Setup Menu
When you enter the Whizpro BIOS CMOS Setup Utility, a Main Menu appears on the screen.
The Main Menu allows you to select from several Setup functions and two exit choices. Use
the arrow keys to select among the items and press <ENTER> key to enter the sub-menu.
A brief description of each highlighted selection appears at the right of the screen.
Following is a brief summary of each Setup category.
System Information System Device Information
General Configuration Options in the original PC AT-compatible BIOS.
Advanced Configuration Options specific to system onboard chipset and devices.
System Specific Setup Select PCI and DIMM clock Signals
Primary IDE Drivers Setup IDE Device & Hard Disk Geometry Data.
Secondary IDE Drives Setup IDE Device & Hard Disk Geometry Data.
Peripherals Enable or Disable On-board peripherals devices.
Serial & Parallel Ports Setup Serial & Parallel ports mode and assign Address &
IRQ.
Power Management Setup Display the fan speed and voltage for your system.
PCI & PnP PnP OS flag, PnP configure date, ISA memory & IRQ
reservation. Assign PCI Slots IRQ.
Hardware Monitor Display the voltage & temperature of your CPU and
system
Restore Default Settings Setup defaults that are factory settings for optimal
performance system operations.
Exit Save CMOS settings & Exit, Discard changes & Exit.