User`s manual

- - 20
Installation
The motherboard also provides external sound system through an user accessible stereo jack
connector soldered to the PWA. This jack allow the connection of self-amplified speakers,
Line-In voice input and Mic-In voice input.
AGP Port (J21)
This product has one 4X AGP slot.
Game/MIDI Port (J9)
The motherboard integrates a Game/MIDI port. This port can let you plug a joystick or a
MIDI device.
3.6.7 Additional Connectors and Headers
Front USB Connector (J26, 10-pin)
The motherboard offers you to hook up front USB ports via chassis.
PIN #
VCC 1 2 VCC
USB 2- 3 4 USB 3-
USB 2+ 5 6 USB 3+
GND 7 8 GND
Key 9 10 NC
Front Panel Connector (J38, 18-pin)
PIN #
HDD+ 1 2 GRN/YEL
HDD- 3 4 PWRLED
GND 5 6 PWR
RST 7 8 GND
VCC 9 10 NC
IRRX 11 12 GND
GND 13 14 KEY
IRTX 15 16 VCC
NC 17 18 NC
Clear Password Header (JP12, 3-pin)
To clear CMOS. By closing JP12, pins 2 and 3 will clear the CMOS. Under the normal
operation, leave JP12, pins 1 and 2 closed.
WOR (Wake On Ring) Connector (J27, 2-pin)
This connector is used for resuming from either the APM sleep mode or the ACPI S1 state. It
requires only one call to access the computer. In addition, it detects incoming call similarly
for external and internal modems. It also requires modem interrupt to be unmasked for
correct operation.
WOL (Wake On LAN) Connector (J24, 3-pin)
This connector is used for remote wakeup of the computer through a network. WOL requires