Service manual

Revision 2/18/05 3 - 33
Hardware Description
Event Log Configuration
Event Log Space Available
View Event Log
Clear Event Log
Event Logging Enabled
Mark Events As Read
Video Configuration
AGP Aperture Size 64MB
Primary Video Adapter AGP
Frame Buffer Size 16MB
USB Configuration
High-Speed USB Enabled
Legacy USB Support Enabled
USB 2.0 Legacy
Support
Hi-Speed
Chipset Configuration
Setup Warning:
Setting items on this screen to incorrect values
may cause your system to malfunction!
ISA Enable Bit Enabled
PCI Latency Timer 32
Burn-In Mode
Extended Configuration Default
Chipset Memory Timing Control
SDRAM Frequency Auto
CPC Override Auto
SDRAM Timing Control Auto
SDRAM RAS Act. to Pre. 8
SDRAM CAS# Latency 3.0
SDRAM RAS# to CAS# Delay 4
SDRAM RAS# Precharge 4
Fan Control Configuration
Fan Control Enabled
Lowest Fan Speed Slow
Hardware Monitoring
Note: These measurements are approximate and
should not be used for validation purposes.
Processor Zone Temperature
55
o
C/131
o
F
System Zone 1 Temperature
37
o
C/98
o
F
System Zone 2 Temperature
38
o
C/100
o
F
Processor Fan Speed 2779 RPM
Rear Fan Speed 0 RPM
Front Fan Speed 2985 RPM
+1.5Vin 1.454V
Vccp 1.482V
+3.3Vin 3.362V
+5Vin 5.184V
+12Vin 12.000V