Service manual

Troubleshooting
Revised 2/18/05 6-9
Control Panel Test (VikingQuest)
The Control Panel Test for the VikingQuest
is more comprehensive than the equivalent
test for Endeavor CR and VikingSelect.
For VikingQuest, the Control Panel Test checks for
proper functioning of all the buttons, as well as the
control panel’s potentiometers.
Smart Probe Test (VikingQuest)
The Smart Probe Test for the VikingQuest
checks the operation of the S403 Current
Probe plugged into the VikingQuest Base
Unit’s rear panel.
When you press each push button on the probe, the
software increments an associated counter on the screen.
Turning the probe wheel displays a percentage reading
between 0 and 100%.
To check electrical stimulus delivery, you may stimulate
your wrist or thumb muscle by pressing one of the probe
push buttons. The current level is controlled by probe
wheel, with a maximum value of 25mA delivered.
Press the Pass, Fail, or Cancel button to verify the test
results and exit the Smart Probe test.
VikingQuest Control Panel Diagnostic Screen
VikingQuest Stim Probe Diagnostic Screen