Service manual

Revision 2/18/05 5 - 37
System Procedures
Enable the System View
Set Regional Preferences
Test the Setup
Step Action
14. To view the Networked Systems area on the
NicVue screen, select View/Select Screen
Mode /System.
15. Resize your screen areas appropriately.
16. Repeat steps 12 and 13 for all systems.
17. Select Tools/Options.
18. Verify that the settings are correct for your
location, and the appropriate Exam types are
available for scheduling.
19. Click OK to save.
20. Add a new patient and run a test as detailed
in the System Verification Procedure
detailed earlier in this chapter.