Service manual

Neurodiagnostic Instruments Service Manual
5 - 32 Revision 2/18/05
9. In the Browser window, select WINDOWS
> SYSTEM32 > DRIVERS > CyUSB.sys
then click on OK. The Files Needed window
appears again.
10. Click on OK.
11. The Files Needed window will open again
for the Quest.spt file path.
12. Browse to WINDOWS > SYSTEM32 >
Quest > Quest.spt. Then click on OK. The
Files Needed window appears again.
13. Click on OK.
14. Click on Finish.
15. Turn off the console base.
16. Connect the console base to another USB
port.
17. Turn on the console base.
18. Repeat steps 3 through 17 for any USB port
that may be used.
Step Action