Service manual

Neurodiagnostic Instruments Service Manual
5 - 26 Revision 2/18/05
Install NicVue (Option)
License the NicVue Application
After you have installed the NicVue application, it must
be licensed for use. To successfully license your
software, you will need to know the Computer Key
number and the Sales Order number for your software
purchase. The Computer Key number appears in the
NicVue Licence Manager window the first time you
attempt to open NicVue. The Sales Order Number
appears on the Sales Order form that accompanied your
software or instrument purchase.
If your system is connected to the internet, use the
procedure below to register automatically. If you do not
have internet access, or if internet registration fails,
contact the VIASYS Technical Support Team at 1-800-
356-0007. You may also send an email to
[e-mail]. Be sure to include
the Computer Key and Sales Order number for your
system in your correspondence. Allow 24 hours for an
email response.
Licensing via the Internet
8. When loading has finished, Remove the MS
Office CD from the drive and click on
Restart.
9. After rebooting, click on
Start>Programs>Microsoft Word.
10. At the End User License Agreement screen,
click on Accept.
11. Activate the software following the on-
screen instructions.
Step Action
1. Close any open applications. Insert the
NicVue Installation CD into the CD or DVD
drive. The CD auto-starts and displays the
NicVue - InstallShield Wizard window.
2. Click on Next. The License Agreement
screen appears.
3. Click on Ye s to accept the license
agreement. The NicVue software loads, then
displays a Setup Complete window.
4. Select Yes, I want to restart my computer
now and then click on Finish to close the
window.
5. Remove the NicVue CD from the CD/DVD
drive and store it in a safe location.
Step Action
Step Action
1. From the Windows Desktop, double-click on
the NicVue icon. The NicVue License
Manager screen appears.
2. If you are connected to the internet, click on
Submit Registration Information Online.
The VIASYS...Purchase Wizard screen
appears.
3. Make sure you have your Sales Order
number available, and click on Next. The
Serial number screen appears.
4. Enter your Sales Order Number in the
Serial number window and click on Next. A
Customer information screen appears.
5. Fill in the fields marked with an asterisk (*),
double-check the information you have
entered for accuracy, then click on Next. A
Thank you screen appears.
6. Click on Finish. A Registered Successfully!
window appears.
7. Click on OK. A Registration summary
screen appears, listing the software options
you have licensed and their status.
8. Click on Done. A Licensing Information
Detected window opens.
9. Click on OK to close the Licensing
Information window. Nicvue proceeds to
open normally.
10. Close NicVue to proceed with the next steps.