Service manual

Revision 2/18/05 5 - 25
System Procedures
Install the CD Writer Application
We recommend that you to install the CD Writer
application provided by the OEM with the computer
(unless the CD Writer has been replaced with a newer
model) to ensure compatibility with the CD writer drive.
Place the OEM provided CD Writer application CD in
the CD ROM drive. The CD should autoplay and bring
up an install screen.
Follow the prompts and use all of the default options. If
the CD does not autoplay, Browse the CD for a
Setup.exe or Install.exe file to activate the installation.
You will also find a CD Writer application on the
Nicolet 2000/XP Driver and Settings CD (Part number
482-63620X), in a folder called "CD."
Load MS Office (Option)
36. Click on the Computer Name tab, then
click on Change. Change the Workgroup
Name to NICOLET. Optional: You can
change the computer name at this time, if
necessary.
37. Click on OK to.....
38. Click on OK to respond to the Welcome to
the Nicolet Workgroup message.
39. Click on OK to respond to the You must
restart this computer for the changes to take
effect message.
40. Click on OK to close the System Properties
window.
41. Click on Ye s to restart your computer now.
42. Remove the Network Driver and Settings
CD from the CD drive. Store it in a safe
place, with your other system software.
43. On the Windows desktop, click on
Start>Settings>Control Panel.
44. On the Control Panel window, click on the
User Accounts icon.
45. On the User Accounts window, under the
Pick a task…" heading, click on Change
the way users log on and off.
46. On the Select logon and logoff options
panel, click on Use the Welcome screen
option to deselect it. Deselecting this option
also deselects Use Fast User Switching
option
47. Click on Apply Options.
48. Close the User Accounts and Control Panel
windows.
49. Click on Start>Turn Off Computer
>Restart.
50. After the system reboots and you have
logged on to Windows, verify that the
system is functioning correctly. It is also
recommended that you run check disk and
defrag.
Step Action
Step Action
1. Place the MS Office CD in the CD or DVD
drive. The installation process will auto-
start.
2. Enter the license key number for the MS
Office software when prompted.
3. Enter EndeavorUser for the user name and
click on Next.
4. At the Type of Install screen, accept the
default location. Click on the Custom
Install icon, then click on Next.
5. Select Word and Excel for loading, deselect
Outlook. Click on Next.
6. Verify that the Summary screen shows:
Word <Run from my computer>
Excel <Run from my computer>
Outlook <Not available>
and click on Install.
7. At the Setup Completed screen, leave the
default settings and click on Finish.