Service manual
Revision 2/18/05 5 - 23
System Procedures
Set Up Windows XP Display & Desktop
Properties
The Windows 2000/XP Drivers & Settings CD, P/N
482-6362xx contains the following files:
• a settings file used to switch Windows XP into
Classic View mode (The only VIASYS-supported
interface). It removes unnecessary icons from the
desktop as well.
• Windows 2000 and Windows XP device drivers for
network, graphics and sound cards supported by
VIASYS.
• a version of Roxio Easy CD Creator/Direct CD
NOTE:
We recommend installing the CD writer application
from the OEM-supplied disk. The software drivers
on driver disk can quickly become out of date for the
current CD writer drives.
Set the Classic View Mode
Step Action
1. Insert the Windows 2000/XP Drivers CD
into the system CD drive. The CD should
auto-play
2. When the CD auto-play completes, scroll to
the bottom of the Action menu and select
Take no action. Place a check mark in the
box labeled Always do the selected action
and click OK.
NOTE:
If you see the message Take a tour of
Windows XP, close the dialog box.
3. Click on Start >All Programs
>Accessories>System Tools >Files and
Settings Transfer Wizard.
4. On the Files and Settings Transfer Wizard
window, click on Next.
5. At the Which computer is this? screen,
select New computer and click on Next.
6. At the Do you have a Windows XP CD?
screen, select I don’t need the Wizard
Disk. I have already collected my files
and settings from my old computer and
click on Next.
7. At the Where are the files and settings?
screen, select Other. Click the Browse
button.
8. In the Browse For Folder window, click on
the plus sign (+) to the left of My Computer.
9. Click on the plus sign (+) to the left of the
CD drive letter to display the contents of the
Settings CD.
10. Click on the plus sign (+) to the left of the
Settings folder.
11. Highlight the USMT2.UNC folder. and
click on OK. The path for the USMT2.UNC
file appears in the Files and Settings
Transfer Wizard window.
12. Click on Next. A progress screen shows the
file transfer progress.
13. Click Finish to close the File and Settings
Transfer Wizard window.
14. A notification window opens, asking you to
logoff. Click Ye s to log off the system and
have the changes take affect.
15. Log back onto the system, and remove the
Windows 2000/XP Drivers CD from the CD
drive.
Step Action