User`s manual

BC45Q
66 BC45Q User’s Manual
2.3.7 PnP/PCI Configurations
2.3.7.1 Init Display First
This item allows you to choose the first display interface to initiate while booting. The
options: PCI Slot, Onboard, PCIEx.
2.3.7.2 Rest Configuration Data
The default is “Disabled”. Select Enabled to reset Extended System Configuration Data
(ESCD) if you have installed a new add-on card, and system configuration is in such a state
that the OS cannot boot.
2.3.7.3 Resource Controlled By
The commands here are “Auto(ESCD)” or “Manual”. Choosing “Manual” requires you to
choose resources from the following sub-menu.
“Auto(ESCD)” automatically configures all of the boot and Plug and Play devices, but you
must be using Windows 95 or above.
2.3.7.4 PCI/VGA Palette Snoop
This is set to “Disabled” by default.