User`s manual

User’s Manual
BC45Q User’s Manual
65
2.3.6.13 Wake-Up by PCI card
The choices are “Enabled” and “Disabled”.
2.3.6.14 Power On by Ring
Select “Enabled” to power on the system from a soft off state by an input signal on the serial
Ring Indicator (RI) line. The choices are “Enabled” and “Disabled”.
2.3.6.15 USB KB Wake-Up from S4
When “Enabled”, enter any key to wake up the system from S4 state. The choices are
“Enabled” and “Disabled”.
2.3.6.16 Resume by Alarm
When “Enabled”, set the date and time at which the RTC (real-time clock) alarm awakens
the system from suspend mode. The choices are “Enabled” and “Disabled”.
2.3.6.17 Primary / Secondary IDE
The options: Disabled, Enabled.
2.3.6.18 FDD, COM, LPT Port
The options: Disabled, Enabled.
2.3.6.19 PCI PIRQ [A-D] #
The options: Disabled, Enabled.
2.3.6.20 Power Type
The options: AT, ATX.
2.3.6.21 HPET Support
The options: Disabled, Enabled.
2.3.6.22 HPET Mode
The default is 32-bit mode.