User`s manual

BC45Q
64 BC45Q User’s Manual
User Defined
Allows you to set each mode individually. When not disabled,
each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and
disable.
2.3.6.6 Video Off Method
Use this to select the method to turn off the video. The choices are “Blank Screen”, “V/H
SYNC+ Blank”, and “DPMS”.
2.3.6.7 Video Off In Suspend
When the system is in suspend mode, the video will turn off. The choices are “No” and
“Yes”.
2.3.6.8 Suspend Type
Select the suspend type. The choice: Stop Grant, Pwron suspend.
2.3.6.9 MODEM Use IRQ
This determines the IRQ in which the MODEM can use. The choices: NA, 3, 4, 5, 7, 9, 10,
11.
2.3.6.10 Suspend Mode
Item Description
Min. Power Saving Minimum power management, HDD Power Down = 15 Min,
Max. Power Saving Maximum power management, HDD Power Down =1 Min
User Defined
Allows you to set each mode individually. When not disabled,
each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and
disable.
2.3.6.11 HDD Power Down
Select “1-15 mins” to enable HDD Power Down mode between 1 to 15 mins. Select
“Disabled” to disable HDD Power Down function.
2.3.6.12 Soft-off by PWR-BTTN
If you choose “Instant-Off”, then pushing the ATX soft power switch but- ton once will switch
the system to “system off” power mode. You can choose “Delay 4 sec”. If you do, then
pushing the button for more than 4 seconds will turn off the system, whereas pushing the
button momentarily (for less than 4 seconds) will switch the system to “suspend” mode.