User`s manual

User’s Manual
BC45Q User’s Manual
59
2.3.4.3 Super I/O Device
 Power ON Function
This feature allows you to wake up the system using any of the listed options. The
selections are “Hot KEY”, “Mouse Left”, “Mouse Right”, “Any KEY” and “BUTTON ONLY”.
 KB Power ON Password
Select this item to set or change the KB power on password.
 Hot Key Power ON
Awaken the system by pressing the hot key button. The choices are “Ctrl-F1”, “Ctrl-F2”,
“Ctrl-F3” to “Ctrl-F8”.
 Onboard FDC Controller
When enabled, this field allows you to connect your floppy disk drives to the onboard floppy
disk drive connector instead of a separate controller card. If you want to use a different
controller card to connect the floppy disk drives, set this field to Disabled.
 Onboard Serial Port
The settings are “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2E8/IRQ3”, “Disabled” and “Auto”
for the on-board serial connector.
 RxD, TxD Active
The options: [Hi, Hi,], [Hi, Lo], [Lo, Hi], [Lo, Lo]
 Power After PWR-Fail
Use this to set up the system after power failure. The “Off” setting keeps the system
powered off after power failure, the “On” setting boots up the system after failure, and the
“Former-Sts” returns the system to the status before power failure.