User`s manual

BC45Q
50 BC45Q User’s Manual
2.3.2.5 First / Second / Third Boot Device
The BIOS tries to load the OS from the devices in the sequence set here. The options are:
Item Description
Floppy Floppy Device
LS120 LS120 Device
HDD Hard Disk Device
CDROM CDROM Device
ZIP100 ZIP-100 Device
USB-FDD USB Floppy Device
USB-ZIP USB ZIP Device
USB-CDROM USB CDROM Device
IBA GE Slot 011 IBA GE Slot 011 Device
Legacy LAN Network Device
Disabled Disabled any boot device
2.3.2.6 Boot Other Device
Use this to boot another device. The options are “Enabled” and “Disabled”.
2.3.2.7 Swap Floppy Drive
A useful feature for those machines that use two floppy drives, when enabled this swaps
the A: and B: drives. This enables you to change the bootable floppy without having to open
the case and switch the cable.
2.3.2.8 Boot Up Floppy Seek
Selection of the command “Disabled” will speed the boot up.
Item Description
Enabled Enable Floppy Seek
Disabled Disable Floppy Seek
2.3.2.9 Boot Up NumLock Status
Set the boot up Num Lock status. The options are “On” and “Off”.
Item Description
On Enable NumLock
Off Disable NumLock