User`s manual

49
3-11 Frequency/Voltage Control
This section is for setting CPU Frequency Control.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Frequency/Voltage Control
Item Help
Auto Detect DIMM/PCI Clk Enabled
CPU Host/PCI Spread Spec. Default
CPU Vcore Select Default
Menu Level >
 Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
CPU Host/PCI Spread Spec.
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The choice are: Default, 100/33Mhz/-0.5%, 100/33Mhz/±0.25%, 100/33Mhz/±0.5%
102/34Mhz/Off, 104/35Mhz/Off, 106/35Mhz/Off, 107/36Mhz/Off
108/36Mhz/Off, 109/36Mhz/Off, 110/37Mhz/Off, 111/37Mhz/Off
112/37Mhz/Off, 133/33Mhz/-0.5%, 133/33Mhz/±0.25%,
133/33Mhz/±0.5%
CPU Vcore Select
This item allows you to select Vcore of the CPU. The choice are: Default, -0.025V, +0.025V,
+0.05V, +0.075V, +0.1V, +0.125V, +0.15V. Max. Vcore is 1.9V.