User`s manual

(8) Power switch: PW BN

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the

system.

System Case Connections

Power LED

GND

VCC

GND

Turbo SW/

SMI

IDELED

PW BN

Speaker

VCC

GND

Reset SW

GND

Turbo LED

SMI

(9) Wake On-LAN Headers: (3-pin WOL1)

This connector connects to a LAN card with a WAKE ON-LAN output. This connector

power up the system when a wake up signal is received through the LAN card.

NOTE:

This feature requires that Wake On LAN or Ring In Wake up is enabled.

Wake-On-LAN Headers

WOL1

(10) FAN Speed Headers: (3-pin FAN1, FAN2)

These connectors cupport cooling fans of 350mA (4.2 Watts) or less, depending on the

fan manufacturer, the wire and plug may be different. The red wire should be positive,

while the black should be ground. Connect the fan’s plug to the board taking into

consideration the polarity of connector.

FAN2

FAN1